2) Next right click on "Local Area Connection" and select "Properties."
3) Next Determine if TCP/IP protocol is installed as shown above. If it is not installed, install it. (To install TCP/IP protocol from the above windows click the "Install" button and select TCP/IP protocol, then click "OK") Next, make sure that TCP/IP is checked and then highlight it and click on "Properties."
4) Enter your Livingston.net specified IP address. (For example: 111.111.111.111) If you have lost the sheet that was given to you by Livingston.net containing your IP address and default gateway, give us a call at 936-328-1146.
5) Enter your subnet mask as shown above.
6) Enter your Livingston.net specified default gateway. (For example: 222.222.222.222) If you have lost the sheet that was given to you by Livingston.net containing your IP address and default gateway, give us a call at 936-328-1146.
7) Select the bullet "Use the following DNS Server addresses."
8) Enter your preferred and alternate DNS server settings as shown above. The click "OK."
9) Congratulations! You did it! You may now enjoy high speed DSL from Livingston.net!
Note: Your username and password are case sensitive. If you are unsure about what they are please call Livingston.net Technical Support.
If you are experiencing technical difficulties with this feel free to contact us:
936-328-1146